Advertisement
5. OPERATION
5.1.
Ensure that you have read, understand and apply the safety instructions in Section 1.
WARNING! Before each use rotate the sanding disc by hand to check it is undamaged and secure. Remove adjusting keys and
‰
wrenches before turning the machine on.
5.2.
TABLE ADJUSTMENT
5.2.1.
The table is adjustable through 45° by slackening the two locking lever handles (fig.1.3.) - both right hand thread, adjusting the table to
the required angle and then fully tightening both handles.
5.3.
MITRE GAUGE ADJUSTMENT
5.3.1.
The gauge is adjustable through ±45° by slackening the thumb screw, adjusting to required angle and tightening the thumb screw.
5.4.
OPERATING THE SANDER
5.4.1.
Feed workpiece carefully into the sanding disc, work methodically and DO NOT force the sander to remove material faster than it was
designed for. Hold workpiece with both hands and ensure that they are not in a position where they could slip up against the sanding disc.
5.4.2.
Ensure large workpieces are supported at table height.
5.4.3.
Turn sander off and make sure sanding disc is stationary before clearing scrap pieces from the table.
6. MAINTENANCE
6.1.
The sander is maintenance free and only requires cleaning using a vacuum cleaner and brush.
6.2.
Occasionally check sander over for loose fittings and to ensure sanding disc is secure.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
sales@sealey.co.uk
Original Language Version
REGISTER YOUR
PURCHASE HERE
www.sealey.co.uk
SM31.V3 Issue: 6 (1,H,F) 19/09//23
Advertisement
