Advertisement
2
Select the language.
• Press the <T> key to select the language, then
press <S>.
• Depending on the selected language, a screen
may appear prompting you to select your
country or region. Select an area first, then select
a country or region.
4A
Find network.
Before establishing a connection, ensure you have the following information:
• Access point name (SSID)
• Encryption key (password) specified for the access point
* For information on the access point name (SSID) and encryption key (password), refer to the access
point's instruction manual.
Select the access point name (SSID) to
connect to.
• Press the <h> <g> keys to select the access
point name (SSID) of the Peripherals found, then
press <S>.
• When Enter manually is selected, enter the
access point name (SSID) in the input screen.
3
Select an item.
• Select an item, then press <S>.
• Select a step as appropriate for the item.
• Find network: Go to step 4-A.
• WPS Push button connection (PBC): Go to step
4-B.
• Skip Wi-Fi settings: Go to step 5.
• When Connect Station is connected via a wired
LAN, this screen will not be displayed. Go to
step 5.
Enter the encryption key (password).
• Select a character with the <T> keys, then press
<S> to enter it.
• When you are finished, select OK, then press
<S>. Wait until the connection is complete.
• This screen is not displayed when you connect to
an unencrypted access point.
• When the connection is complete, the Set date/
time screen will appear.
EN
7
Advertisement
