Advertisement
4. Remote control
Remote control
transmitter
<H> Home button
Home screen
appears.
<S> Set button
Selected item takes
effect.
<B>
Back button
Previous screen
reappears.
<M>
Menu button
Menu screen appears.
5. Connecting your CS100
1
Connect the HDMI cable to the Connect Station
Plug the cable connector to the HDMI terminal of
Connect Station. Connect the HDMI cable to the
TV set.
<P> Power
The remote control uses two AAA/R03 batteries
button
(provided)
Turn on the
power or put
Connect Station
into the standby
state.
<T>
Cross keys
Battery
compartment
cover
2
Connect the DC plug to Connect Station
Connect the plug of the DC cord to the power
terminal of Connect Station, with the cord of the
plug facing outward, as shown in the illustration.
Do this before plugging into the mains.
EN
1
Open the battery
compartment
cover by putting
a coin or other
similar object in the
cover's groove and
turning it.
2
Insert batteries
in the battery
compartment,
making sure that
their plus and minus
ends are correct,
then close the
cover.
5
Advertisement
