Gigabyte R283-Z96-AAE1 User Manual page 95

Parameter
PCI Bus Driver Version
U2_P0_P0/1/2, U2_P1_P0/2/3
Lanes
(Note1)
U2_P0_P0/1/2, U2_P1_P0/2/3
I/O ROM
(Note1)
U2_P0_P0/1/2, U2_P1_P0/2/3
Link Speed
(Note1)
OCP# Lanes
(Note2)
OCP# I/O ROM
(Note2)
OCP# Link Speed
(Note2)
Onboard LAN Controller
Onboard LAN# I/O ROM
PCI Devices Common Settings
Above 4G Decoding
SR-IOV Support
Relaxed Ordering
(Note1) This section is dependent on the available MCIO connector.
(Note2) This section is dependent on the available OCP connector.
(Note3) This section is dependent on the available LAN controller.
Description
Displays the PCI Bus Driver version information.
Change MCIO PCIe lanes.
Options available: Disabled, Auto, x8, x16, x4x4, x8x8, x8x4x4,
x4x4x8, x4x4x4x4. Default setting is Auto.
When enabled, this setting will initialize the device expansion ROM
for the related devices.
Options available: Disabled, Enabled. Default setting is Enabled.
Configure MCIO slot max link speed.
Options available: Auto, Gen5, Gen4, Gen3, Gen2, Gen1.
Default setting is Auto.
Change OCP PCIe lanes.
Options available: Disabled, Auto, x16, x8x8, x8x4x4, x4x4x8,
x4x4x4x4. Default setting is Auto.
When enabled, this setting will initialize the device expansion ROM
for the related PCI-E slot.
Options available: Disabled, Enabled. Default setting is Enabled.
Configure OCP slot max link speed.
Options available: Auto, Gen5, Gen4, Gen3, Gen2, Gen1.
Default setting is Auto.
Enable/Disable the onboard LAN devices.
(Note3)
Options available: Disabled, Enabled. Default setting is Enabled.
Enable/Disable the onboard LAN devices, and initializes device
expansion ROM.
(Note3)
Options available: Disabled, Enabled. Default setting is Enabled.
Enable/Disable memory mapped I/O to 4GB or greater address
space (Above 4G Decoding).
Options available: Disabled, Enabled. Default setting is Enabled.
If the system has SR-IOV capable PCIe devices, this item Enable/
Disable Single Root IO Virtualization Support.
Options available: Disabled, Enabled. Default setting is Enabled.
Enable/Disable PCI express device relaxed ordering.
Options available: Disabled, Enabled. Default setting is Enabled.
BIOS Setup
- 95 -