Gigabyte R283-Z96-AAE1 User Manual page 151

Parameter
CPPC
HSMP Support
SVI3 SVC Speed Control
3D V-Cache
Diagnostic Mode
PCIE Speed PMM
Control
Description
Enable/Disable the CPPC feature.
Options available: Disabled, Enabled, Auto. Default setting is Auto.
Enable/Disable the HSMP support.
Options available: Disabled, Enabled, Auto. Default setting is Auto.
Options available: Auto, Manual. Default setting is Auto.
Options available: Auto, Disable, 1 stack, 2 stack, 4 stack.
Default setting is Auto.
Options available: Disabled, Enabled, Auto. Default setting is Auto.
Options available: Dynamic link speed determined by Power Management
functionality, Static Target Link Speed (GEN4),Static Target Link Speed (GEN5),
Auto. Default setting is Auto.
BIOS Setup
- 151 -