Gigabyte R283-Z96-AAE1 User Manual page 13

Storage R283-Z96-AAE1/R283-Z96-AAJ1
Front side:
Š 24 x 2.5" Gen5 NVMe hot-swappable bays
Š (12 x from CPU_0, 12 x from CPU_1)
Rear side:
Š 4 x 2.5" SATA/SAS4 hot-swappable bays, via CRS2810 from CPU_1
SAS card is required for SAS devices support
R283-Z96-AAE2/R283-Z96-AAJ2
Front side:
Š 4 x 2.5" Gen5 NVMe/SATA/SAS4 hot-swappable bays, NVMe from CPU_1
Š 20 x 2.5" SATA/SAS4 hot-swappable bays
Rear side:
Š 4 x 2.5" SATA/SAS4 hot-swappable bays
Broadcom SAS4x48 expander
Bandwidth: SATA 6Gb/s or SAS4 24Gb/s per port
a) SAS card is required to enable the drive bays
b) All devices are connected to SAS expander
c) Please select enterprise SATA devices for SAS expander system
R283-Z96-AAE3/R283-Z96-AA3
Front side:
Š 8 x 2.5" Gen5 NVMe hot-swappable bays
Š 16 x 2.5" SATA/SAS4 hot-swappable bays
Š (4 x NVMe from CPU_0, 4 x NVMe from CPU_1)
Š (SATA from CPU_0)
SAS card is required for SAS devices support
SAS R283-Z96-AAE1/R283-Z96-AAE3/R283-Z96-AAJ/R283-Z96-AAJ3
Š Depends on SAS add-on card
R283-Z96-AAE2/R283-Z96-AAJ2
Š Supported
RAID
R283-Z96-AAE2/R283-Z96-AAJ2
Š Depends on SAS add-on card
Hardware Installation
- 13 -