Components View; Operation - Craftsman 580.7622 Owner's Manual

KNOW YOUR HIGH PRESSURE WASHER
Read this owner's manual and safety rules before operating your high pressure washer. Compare the illustra-
tions with your high pressure washer to familiarize yourself with the locationsof various controls and adjustments.
Save this manual for future reference.
Chemical Injection
Tube and Filter
Spray Gun
High Pressure Hose
Nozzle Extension
Gas Cap
Air Filter
Adjustable Nozzle
Water Inlet
Rotating Brush
Rotating Brush Adapter
Pump - Develops high water pressure.
Engine Throttle Control - Sets engine in starting mode
for recoil starter; STOPS running engine.
Primer Bulb -- Prepares a cold engine for starting.
Recoil Starter -- Used for starting the engine manually.
Air Filter -- Dry type filter element limitsthe amount of
dirt and dust that gets in the engine.
Spray Gun -- Controlsthe application of water onto
cleaning surface with trigger device. Includes safety latch.
Chemical Injection Tube and Filter -- Mixes water and
detergent in outlet water flow.
High Pressure Outlet -- Connection for high pressure
hose.
Water inlet -- Connectionfor garden hose.
Rotating Brush -- Use this brush for automatic scrub-
bing of surfaces. Attaches to the nozzle extension. Note:
When attaching to nozzle extension, you must use the
accessory adapter.
Rotating Brush Adapter -- Allows the rotatingbrush to
be attached to the nozzle extension.
Engine Throttle Control
Primer Bulb
High Pressure
Outlet
Pump
Car Wash
" House Wash
Turbo Nozzle -- Attaches to the nozzle extension and
creates a high pressure stream that rotates in a circular
pattern.
Adjustable Nozzle -- Attaches to the nozzle extension
and adjusts the spray pattern to be either a low pressure
stream or a high pressure stream. Twisting the nozzle
adjusts the narrow spray pattern to a fan spray pattern.
Note: You can only siphon detergent in the low pressure
mode.
Car Wash -- Use the concentrate to wash your car or
boat.
House Wash -- Use the concentrate to wash your
House.
Nozzle Extension -- Attach one end to the spray gun.
Attach the other end of the nozzle extension to either the
adjustable nozzle, turbo nozzle or rotating brush adapter.
High Pressure Hose -- Attach one end to the pump,
Attach the other end to the spray gun,
Oil Fill Cap -- Fill engine with SAE 30 oit here.
Gas Cap -- Fill gas tank with unleaded gasoline here,
6