Advertisement
English
Thorough cleaning
We advise you to clean the shaving heads
thoroughly once a month or when the shaver
does not shave as well as it used to.
1
Make sure that the appliance is switched off
and disconnected from the wall socket.
2 Press the release button on the shaving unit
and pull the shaving head holder off the
shaving unit.
3 Rinse the hair chamber and shaving head
holder under the tap.
4 Remove the shaving heads. For detailed
instructions, see 'How do I replace the
shaving heads?'.
Note: Do not clean more than one cutter and
guard at a time, since they are all matching
sets. If you
accidentally put a cutter in the wrong shaving
guard, it may take several weeks before
optimal shaving performance is restored.
5 Clean the cutter and guard under the tap.
6 Shake off excess water.
7 Put the shaving heads back into the shaving
unit. For detailed instructions, see 'How do I
replace the shaving heads?'.
8 Insert the hinge of the shaving head holder
into the slot in the top of the shaving unit
and close the shaving unit.
44
Advertisement
