Bosch 0.601.18P.703 Original Instructions Manual page 15

14 | English
Never use the machine with a damaged
cable. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables
increase the risk of an electric shock.
Check the cable regularly and have a dam-
aged cable repaired only through an author-
ised customer service agent for Bosch power
tools. Replace damaged extension cables.
This will ensure that the safety of the power
tool is maintained.
Wear non-skid shoes. This prevents injuries
that can occur from slipping on smooth sur-
faces.
Use only original Bosch accessories.
The safety and operating instructions for
the drill stand and the accessories being
used are to be strictly observed!
Never leave the machine before it has come
to a complete stop. Cutting tools that are
still running can cause injuries.
Connect the machine to a mains supply with
proper earthing connection. Socket outlet
and extension cable must be equipped with
an operative protective conductor.
Products sold in GB only: Your product is fit-
ted with an BS 1363/A approved electric plug
with internal fuse (ASTA approved to
BS 1362).
If the plug is not suitable for your socket out-
lets, it should be cut off and an appropriate
plug fitted in its place by an authorised cus-
tomer service agent. The replacement plug
should have the same fuse rating as the origi-
nal plug.
The severed plug must be disposed of to
avoid a possible shock hazard and should nev-
er be inserted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a re-
sidual current device (RCD) with a rated re-
sidual current of 30 mA or less.
1 609 929 W83 | (9.11.10)
Functional Description
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may
result in electric shock, fire and/or
serious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
In conjunction with wet-drilling diamond core
bits and a water supply, the machine is intended
for wet drilling in mineral materials such as con-
crete and reinforced concrete. It is not suitable
for overhead drilling. The machine may only be
used in conjunction with the S 500 A diamond-
drill stand. The machine can be used in combi-
nation with an extraction device (water collec-
tion ring and all-purpose vac).
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 S 500 A diamond-drill stand*
2 Residual current device (RCD)
3 Water outlet connector
4 Gear selector
5 Feed handle (S 500 A)
6 Water collection ring*
7 Core bit*
8 Sliding ring*
9 Drill spindle
10 Water-flow indicator
11 Water cock
12 Control indicator
13 On/Off switch
14 Insulated gripping surfaces
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools