Table of Contents
Advertisement
Connecting the Monitor
Connect the power cord for your monitor to the power port on the back of the monitor.
1.
Plug the power cord for the monitor into a nearby outlet.
2.
Use a connection appropriate for your computer.
Using the D-sub (Analog) connector on the video card.
2-1.
Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.
[ RGB IN ]
2-2.
Using the DVI (Digital) connector on the video card.
Connect the DVI Cable to the DVI Port on the back of your Monitor.
[ DVI IN ]
Using Macintosh
2-3.
- Connect the monitor and the Macintosh computer using the computer connection cable.
If the monitor and the computer are connected, you can turn them on and use them.
SyncMaster 713BM Plus
Advertisement
Table of Contents
