Dell R93M8 Owner's Manual page 102

9. Remove the memory modules.
10. Remove the solid-state
11. Remove the WLAN card.
12. Remove the heat-sink and fan
13. Remove the processor.
About this task
The following image indicates the connectors on your system board.
1. Intrusion-switch cable
3. UDIMM slots
From the left (a>b>c>d):
DIMM 3
DIMM 1
DIMM 4
DIMM 2
5. SD-card reader slot
7. M.2 WLAN slot
9. Chassis-fan cable
11. Hard-drive data cable (SATA 1)
13. SATA power cable
15. PCIe x4 slot (SLOT 4)
17. M.2 2230 solid-state drive slot
19. Video cable
21. I/O cable
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
102 Rimozione e installazione di unità sostituibili sul campo (FRU)
drive.
assembly.
2. Processor-power cable
4. Power-button cable
6. Hard-drive data cable (SATA 0)
8. M.2 2230/2280 solid-state drive slot
10. ATX system power connector
12. Optical-drive/hard-drive data cable (SATA 2)
14. PCIe x16 slot (SLOT 2)
16. Coin-cell battery socket
18. Type-C cable
20. Processor socket