Advertisement
Configuring Home City, Time and Date Settings Manually
Be sure to set your Home City before using this watch.
If you are in an area where a signals cannot be received, adjust time and date
settings manually.
To configure Home City, time, and date settings manually
1. In the Timekeeping Mode, hold down A for at
City code
least two seconds until ADJ is displayed.
When you release A, the city code and city name
will scroll from right to left. This is the setting
screen.
The hour and minute hands will automatically
move out of the way at this time.
E-10
3. Use B and D to change the selected setting.
Screen
This setting item:
Home City
Summer time
AUTO: Auto switching using signal
data
OFF: Standard time
ON: Summer time
Toggle between 12-hour (12H) and
24-hour (24H) timekeeping
Reset the seconds to 00
30 to 59 seconds: Adds 1 to minutes
Change the hour or minute
Change the year, month, or day
E-12
Mode Selection and Operations
Press C to change the mode.
To return to the Timekeeping Mode from any other mode, hold down C for at
least four seconds.
Timekeeping Mode
C
Alarm Mode
C
Countdown Timer Mode
C
E-14
World Time Mode
A + B: Swaps Home Time and World Time.
Holding down A for at least two seconds will toggle summer time (DST) between on and off.
E-16
Countdown Timer Mode
Reset
A (two seconds): Displays timer time setting screen.
C: Selects minutes or seconds.
B, D: Use to change the selected setting.
A: Exits the setting screen.
E-18
User's Guide 5640
Operation
Use D (East) and B (West).
Press D.
Press D.
Press D.
Use D (+) and B (–).
Use D (+) and B (–).
C
World Time Mode
C
Stopwatch Mode
Scrolls the selected city.
Start/Stop
2. Press C to move the flashing in the sequence shown below to select a setting.
Home City and Summer Time
C
C
City Code
DST
C
Power Saving
C
Illumination Duration
C
Button Operation Tone On/Off
C
Screen
This setting item:
Enabling and disabling the button tone
/
KEY : ON (enabled)
MUTE: OFF (disabled)
Display illumination duration
[
]: Approximately 1.5 seconds
/
[
]: Approximately 3 seconds
/
Enabling and disabling power saving
4. Press A to exit the setting screen.
Timekeeping Mode
A: Changes digital display contents.
Month, day, day of the week
Month, day, second
Stopwatch Mode
Split/Reset
D
D
A
Start
Stop
Reset
Alarm Mode
Toggle on and off.
A (two seconds): Displays alarm time setting screen.
C: Selects hour or minutes.
B, D: Use to change the selected setting.
A: Exits the setting screen.
From 60 minutes before the alarm time is reached, the alarm mark will start to flash and a
countdown will appear in the Timekeeping Mode.
Time and Date
C
12/24-Hour Format
Seconds
C
Hour
C
Minute
C
Day
Month
Year
C
C
E-11
Operation
Press D.
Press D.
Press D.
E-13
Turns on illumination.
Hour, minute, second
E-15
Start/Stop
E-17
Scrolls alarm screens.
E-19
Advertisement
