Casio AWM-500D-1A8 User Manual

MA2007-EA © 2020 CASIO COMPUTER CO., LTD.
For a full Operation Guide and Q&A
information about this product, go to the
website below.
https://world.casio.com/manual/wat/
E-2
Charging the Watch
While wearing the watch, take care so your sleeve does not
block its face (solar panel) from light. Charging efficiency
may be reduced if the face (solar panel) is blocked from light,
even partially.
When you are not wearing the watch, leave it where its face
(solar panel) is exposed to bright light for charging.
To help ensure stable operation, expose the face of the
watch to about a half day of direct sunlight each month to
charge it.
Caution
The case of the watch may become extremely hot when charging. Guard against
burn injury.
E-4
Power Saving
When turned on, Power Saving enters a sleep state automatically whenever the
watch is left for a certain period in an area where it is dark.
Elapsed Time in Dark
60 to 70 minutes (display sleep)
6 or 7 days (function sleep)
The watch will not enter a sleep state between 6:00 AM and 9:59 PM. If the watch
is already in a sleep state when 6:00 AM arrives, however, it will remain in the sleep
state.
The watch will not enter a sleep state while it is in the Stopwatch Mode or
Countdown Timer Mode.
E-6
Configuring Current Time and Date Settings Automatically
Date and time settings are kept accurate using information provided by a time
calibration signal.
Time calibration signals can be received using Auto Receive or Manual Receive.
Normally, you should set up the watch for Auto Receive of the current time and
date.
If you are in an area where a time calibration signal cannot be received, you need
to adjust time and date settings manually.
For information about the manual receive operation and time calibration signal
reception ranges, refer to the Operation Guide available at the CASIO website.
Important!
For the watch to be able to receive a time calibration signal, its Home City setting
must be one where time calibration signal reception is normally supported. For
details about the cities where calibration signal reception is supported, see the
"City Code Table" at the back of this manual.
E-8
User's Guide 5640
Digital Displays Operation
Digital display is disabled, but all
Blank
functions are enabled.
Hour and minute hands stop at
Blank 12 o'clock. All functions are disabled,
but timekeeping is maintained.
Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is
designed, carefully read and follow the instructions in this manual, especially the
information under "Operating Precautions" and "User Maintenance".
Be sure to keep all user documentation handy for future reference.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage
or loss suffered by you or any third party arising through the use of your watch or
its malfunction.
Important!
Keep the watch's face exposed to light as much as possible.
This manual provides a brief overview of your watch.
Contents
Charging the Watch ............................................................................................... E-4
To recover from the sleep state ......................................................................... E-7
Configuring Current Time and Date Settings Automatically ............................. E-8
Configuring Home City, Time and Date Settings Manually ............................. E-10
To configure Home City, time, and date settings manually ............................. E-10
Mode Selection and Operations ......................................................................... E-14
Misaligned Hands ................................................................................................ E-21
Specifications ...................................................................................................... E-22
Operating Precautions ........................................................................................ E-25
User Maintenance ............................................................................................... E-35
Important!
If the watch is not exposed to light for long periods, it will disable some functions
and eventually stop timekeeping.
For information about how long it takes to charge, refer to the Operation Guide
available at the CASIO website.
If timekeeping stops, you will need to expose the watch to light for a number of
hours before it will restart.
Power Levels
You can get an idea of the watch's power level by observing the battery
power indicator.
If the battery power indicator shows L or is not displayed at all, it means
that battery power is very low. Expose the watch to bright light for charging
as soon as possible.
To recover from the sleep state
Move the watch to a well-lit area, press any button, or angle the watch towards your
face for reading.
Auto Receive
1. Enter the Timekeeping Mode.
2. Leave the watch near a window between midnight and 5:00 a.m.
When the receive operation is successful, the time and date settings will be
adjusted automatically.
If you are unable to receive a signal, check the Operation Guide available at the
CASIO website to ensure the watch is in a suitable location.
ENGLISH
E-1
E-3
E-5
E-7
E-9