Gigabyte G593-ZD2-AAX1 User Manual page 112

Parameter
ECC Configuration
(continued)
DRAM Scrubbers
This item available when DRAM UECC Retry is set to Enabled.
(Note)
BIOS Setup
Description
DRAM UECC Retry
Š
– Enable/Disable DRAM UECC Retry.
– Options available: Auto, Enabled, Disabled. Default setting is
Disabled.
Max DRAM UECC Error Replay
Š
– Default setting is 8.
Memory Clear
Š
– Options available: Auto, Enabled, Disabled. Default setting is
Auto.
Address X0R after ECC
Š
– Options available: Auto, Enabled, Disabled. Default setting is
Auto.
Press [Enter] to configure advanced items.
DRAM ECS Mode
Š
– Options available: Auto, AutoECS, ManualECS, DisableECS.
Default setting is Auto.
DRAM Redirect Scrubber Enable
Š
– Options available: Auto, Enabled, Disabled. Default setting is
Auto.
DRAM Scrub Redirection Limit
Š
– Options available: Auto, 8 Scrubs, 4 Scrubs, 2 Scrubs, 1 Scrub.
Default setting is Auto.
DRAM Scrub Time
Š
– Options available: Disabled, 1 hour, 4 hours, 6 hours, 8 hours,
12 hours, 16 hours, 24 hours, 48 hours. Default setting is 24
Hours.
DRAM Error Threshold Count
Š
– Options available: Auto, ETC_4, ETC_16, ETC_64, ETC_256,
ETC_1024, ETC_4096. Default setting is Auto.
DRAM ECS Count Mode
Š
– Options available: Auto, Row Count Mode, Code Word Count
Mode. Default setting is Auto.
DRAM AutoEcs during Self Refresh
Š
– Options available: Auto, AutoEcs Disabled, AutoEcs Enabled.
Default setting is Auto.
DRAM ECS WriteBack Suppression
Š
– Options available: Auto, Enable, Disable. Default setting is
Auto.
DRAM X4 WriteBack Suppression
Š
– Options available: Auto, Enable, Disable. Default setting is
Auto.
- 112 -
(Note)