Table of Contents
Advertisement
Cleaning
en
Brand logo
Display*
Do not display
Fan run-on time
Recommended*
Minimum
Factory settings
Restore
Do not restore*
* Factory setting (factory settings may vary depending on the appli-
ance model)
--------
Changes to the language, button tone and
Note:
display brightness settings take effect immediately. All
other changes take effect after the settings have been
changed.
Power cut
The changes you make to the settings are saved even
after a power cut.
You only have to reset the settings for the initial use
following a long-term power cut. The appliance can
bridge a short-term power cut.
Changing the time
If you want to change the time, for example from
summer to winter time, you have to change the basic
setting.
The appliance must be switched off.
Touch the ° field for approx. 3 seconds.
1.
Notes on the process appear on the display.
Press the s field to confirm the notes.
2.
The first setting "language" appears in the display.
Touch the s field.
3.
The setting for the clock appears.
Turn the rotary selector to change the clock time.
4.
Press and hold the ° field for approx. 3 seconds to
5.
confirm the setting.
A note is shown on the display to confirm that the
settings have been saved.
cleaning agents
Appliance exterior (with aluminium front)
Appliance exterior (with stainless steel front)
Cooking compartment interior with evaporator
dish
Water tank
Tank recess
Seal in the water tank lid
Rails
20
DCleaning
W ith good care and cleaning, your appliance will retain
C l e a n i n g
its appearance and remain fully functioning for a long
time to come. We will explain here how you should
correctly care for and clean your appliance.
:
Do not use high-pressure cleaners or steam jet cleaners
to clean your appliance.
Caution!
Risk of surface damage
Do not use
■
■
■
■
If such an agent comes into contact with the front of the
appliance, wash it off immediately with water.
Caution!
Risk of surface damage
If descaler comes into contact with the front of the
appliance or any other sensitive surfaces, wash it off
immediately with water.
Remove food residues from the cooking compartment
as soon as the appliance has cooled.
Salts are very corrosive and can cause rust. Remove
remains of acidic sauces (ketchup, mustard) or salted
food from the cooking compartment immediately after
cooling.
Do not use hard scouring pads or cleaning sponges.
Use soapy water and dry with a soft cloth.
Mild window cleaning agent - wipe over the aluminium front horizontally and without applying pres-
sure using a soft window cloth or a lint-free microfibre cloth.
Use soapy water and dry with a soft cloth.
Always remove flecks of limescale, grease, starch and albumin (e.g. egg white) immediately. Spe-
cial stainless steel cleaning agents can be obtained from the after-sales service or from specialist
retailers.
Hot, soapy water or a vinegar solution use the enclosed cleaning sponge or a soft washing-up
brush.
Caution!
The cooking compartment could rust.
Do not use steel pads or scourers.
Soapy water - do not clean in the dishwasher.
Rub dry after every use
Thoroughly dry after every use
See section: Cleaning the rails
Warning – Risk of short circuit!
harsh or abrasive cleaning agents
oven cleaners
corrosive or aggressive cleaners, or those
containing chlorine
cleaning agents with a high alcohol content
Advertisement
Table of Contents
