Sanyo SAP-K181AA Technical & Service Manual page 48

IMPORTANT
Avoid using radio equipment
such as mobile phone near
(within 1 m) the indoor unit.
Some radio equipment may
cause malfunction of the unit.
If the trouble happens, dis-
connect power and restart the
air conditioner after a few
minutes.
REMOTE CONTROL receiver
Operation selector
ON position
OFF position
TEST position
CAUTION
OPERATION lamp
TIMER lamp
6
Unit Display and Operation Selector
INDOOR UNIT
OPERATION lamp
OPERATION
This section picks up infrared signals from the remote control
unit (transmitter).
This position is for operating the air conditioner with the
wireless remote control unit.
Set the selector normally in this position.
Switch the selector to the OFF position if you are not going to
use the air conditioner for a few days or longer.
The OFF position does not disconnect the power. Use the main
power switch to turn off power completely.
This position is used only when servicing the air conditioner.
Do not set at the TEST position for normal operation.
This lamp lights when the system is in the continuous DRY and
COOL mode.
This lamp lights when the system is being controlled by the
timer.
TIMER lamp REMOTE CONTROL
receiver
TIMER
ON
OFF
TEST
Operation selector
OI-006-06EG