Technical Specifications - D-Link DHP-P600AV User Manual

Appendix A - Technical Specifications
General PowerLine Interface
Ethernet Interface
Functionality Standards
Security
LEDs
PowerLine Modulation Scheme
PowerLine Frequency Band
Data Rate
Physical Dimensions
Weight
Power
Power Consumption
Temperature
Humidity
Certifications
1 Maximum throughput is based on theoretical transmission PHY rate. Actual data throughput will vary. Network conditions and environmental factors, including volume of traffic and network overhead, may lower actual data throughput rate. Interference from devices that emit electrical
noise, such as vacuum cleaners and hair dryers, may adversely affect the performance of this product. This product may interfere with devices such as lighting systems that have a dimmer switch or a touch-sensitive on/off feature, short wave radios, or other PowerLine devices that do not
follow the HomePlug AV standard.
2 Power outlets and electrical wiring must all be part of the same electrical system. Certain electrical conditions in your home, such as wiring condition and configuration, may affect the performance of this product. Additional D-Link PowerLine AV series products are required to add new
devices to the network. A minimum of two D-Link PowerLine AV series products are required to create a network. Connecting this product to a power strip with a surge protector may adversely affect the performance of this product. For best results, plug the adapter directly into a wall outlet.
D-Link DHP-P600AV

Technical Specifications

• Power plug (country-dependent)
• Gigabit Ethernet LAN port
• IEEE 802.3
• IEEE 802.3u
• 128-bit AES data encryption
• Power
• Ethernet
• OFDM symbol modulation
• 2 MHz to 86 MHz
• Ethernet: 10/100/1000 Mbps (autonegotiation)
• 113.49 x 58.48 x 37.80 mm (4.47 x 2.30 x 1.49 inches)
• 195 grams
• Input: 100 to 240 V AC, 50/60 Hz
• < 3.7 W
• Operating: 0 to 40 °C (32 to 104 °F)
• Operating: 10% to 90% non-condensing
• CE
• RJ-45 connector
• IEEE 1901
• HomePlug AV2
• PowerLine
• PowerLine: Up to 1000 Mbps (PHY rate)
• Storage: -20 to 65 °C (-4 to 149 °F)
• Storage: 5% to 95% non-condensing
• CE/LVD
1
15