Page 1
INSTRUCTION MANUAL Fire Pit Wind Guard WG01...
Page 2
INTRODUCTION Thanks for purchasing and trusting NUUGARDEN with your home decorating plans. This product is a furniture designed and made by NUUGARDEN Corp. We are committed to R&D innovation and creating the most refined, diverse choice of outdoor collection. After unpacking and before every use, check whether the item shows any damages.
Page 3
Images Part Qty. Number Sizes Warnings: Never place your wind guard directly on the fire pit insert. Always ensure the rubber feet are used. Always ensure the silicon insert is on the set screws. Always ensure there is a 1/2” gap between the glass panels. Always check the glass panels for cracks.
Page 4
ASSEMBLY INSTRUCTIONS CAVEAT Note: Please do not tighten any bolt until all bolts have been put into right place. If you tighten one bolt, it maybe cause other bolts out of position. STEP 1 Connect 4 pieces of wind guards with 8 brackets (C&D) and 16 set screws (E) by the screwdriver (F). Tighten all screws at the bottom.
Page 5
CARE AND MAINTENANCE Follow the instruction for the material of your special product to make sure that it stays in the best shape for as long as possible. The information below is only intended as a general guideline. For more information, please contact •...
Page 6
CUSTOMER SERVICE Thanks for purchasing this NUUGARDEN furniture. We are here to help you maximize your enjoyment and appreciation of it. Please do not hesitate to contact our customer service when you have any questions regarding assembly or accessories. Add: 6366 Corley Road, Norcross, GA 30071. Tel: (800) 257-7108 Web: http://www.nuugarden.com E-mail: service@nuugarden.com...
Need help?
Do you have a question about the WG01 and is the answer not in the manual?
Questions and answers