Table of Contents
Advertisement
1
3
4
5
7
9
10
CONTROLS AND SETTINGS
2
6
8
Control Lock
1
Use to lock the display. Press and
hold
for 3 seconds to enable/
disable. The indicator flashes and
an alert sounds when CONTROL
LOCK is enabled. You cannot
make changes on the display
while the lock is engaged.
Exterior light
2
Your appliance has exterior lights
under the refrigerator doors and
the Custom-Flex Temp drawer.
Press and hold
to enable the lights. The lights
will remain on until you disable
them by pressing and holding
for 2 seconds.
NOTE
This unit is equipped with a cooling
system where one section (Refrigerator/
Freezer) may cool slower than the other
initially. Allow 24 hours for unit to stabi-
lize and reach the desired temperatures.
NOTE
The recommended settings for a prod-
uct installed in a kitchen is 37°F for the
fresh food compartment and 0°F for
the freezer.
Temp Settings
3
Select compartment for tem-
perature change (FREEZER or RE-
FRIGERATOR). Press either the +
or - to adjust to desired tempera-
ture setting.
Freezer temp - Control tempera-
tures range from -6°F / -21°C to
+6°F / -15°C.
Refrigerator temp - Control tem-
peratures range from +34°F / +1°C
to +44°F / +7°C.
Clear Alerts
4
Resets any alarms that are active
and illuminated on the display
(Door Open, High Temp,
Power Outage).
17
for 5 seconds
Advertisement
Table of Contents
