Toro Z Master Professional 3000 Series Operator's Manual page 9

126-2055
1. Wheel lug nut torque 129 N∙m (95 ft-lb) (4x)
2. Wheel hub nut torque 319 N∙m (235 ft-lb)
3. Read and understand the Operator's Manual before
performing any maintenance, check torque after first 100
hours then every 500 hours thereafter.
126-4398
1. Read the Operator's
Manual
2. Lock
decal126-2055
decal126-4398
3. Unlock
1. Read the Operator's
Manual.
2. Height-of-cut
1. Belt routing
9
127-0326
3. Remove the key from
the ignition and read the
Operator's Manual before
performing maintenance
or servicing the machine.
136-5508
decal127-0326
decal136-5508