Toro 75969TE Operator's Manual page 45

Riding mower
Table of Contents

Advertisement

Figure 54
Changing the Engine Oil
Service Interval: After the first 8 hours
Every 100 hours (more often in dirty or dusty
conditions).
Note:
Dispose of the used oil at a recycling center.
1.
Start the engine and let it run for 5 minutes.
g035392
Note:
This warms the oil so it drains better.
2.
Park the machine so that the rear is slightly
lower than the front to ensure that the oil drains
completely.
3.
Disengage the blade-control switch (PTO), move
the motion-control levers to the N
position, and engage the parking brake.
4.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position
g194611
45
EUTRAL
(Figure
55).
Figure 55
-
LOCK
g035392
g027734

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z master professional 6000 series

Table of Contents