Toro 75969TE Operator's Manual page 10

126-2055
1. Wheel-lug nut torque 129 N∙m (95 ft-lb) (4x)
2. Wheel-hub nut torque 319 N∙m (235 ft-lb)
3. Read and understand the Operator's manual before
performing any maintenance, check the torque after the first
100 hours then every 500 hours thereafter.
1. Warning—read the Operator's Manual.
2. Warning—do not operate this machine unless you are trained. 6. Crushing/dismemberment hazard of bystanders—do not carry
3. Warning—engage the parking brake, shut off the engine, and
remove the ignition key; read the instructions before servicing
or performing maintenance.
4. Thrown object hazard—Shut off the engine and pick up debris
before operating, keep bystanders a safe distance away from
the machine, and keep the deflector in place.
decal126-2055
1. Belt routing
114–4468
5. Loss of traction/control hazard, slopes—loss of traction/control
on a slope, disengage the blade-control switch (PTO), and
proceed off the slope slowly.
passengers, and look forward and down when operating the
machine, look behind and down when reversing.
7. Cutting/dismemberment hazard; hand or foot—stay away
from moving parts and keep all guards and shields in place.
10
136-5508
decal136-5508
decal114-4468