Oils And Lubricants - Kesla 2010 User Manual

MAINTENANCE

9.1.1 Oils and Lubricants

The table below sets forth certain hydraulic oils, lubricating oils and greases, which are suitable for
use in a crane.
Oil Brand Hydraulic system
summer
ESSO UNIVIS
N 46
MOBIL DTE 16
SHELL TELLUS
OIL T / TX
46
TEBOIL HYDRAULI
OIL 46
NESTE HYDRAULI
46
* When starting a machine the pump manufacturer's instructions for the cold start must be com-
plied with.
* If the oil temperature does not rise above 70°C in the summer, winter oil can be used all year
round.
* In the factory the crane is filled with this oil: TEBOIL ECO 46
* On the choice of hydraulic oil, however, follow primarily the recommendations of the manufactur-
er of the forwarder or the supplier of the hydraulic system.
* Crane oil capacity is approximately 50 l depending on the size, so when changing the oil a con-
siderable amount of oil remains unchanged, because the compatibility of the changed and pre-
filled oil should be taken into account.
Turning device
winter
UNIVIS GEAR OIL GX
N 32.22 80W/90
DTE 15.13 MOBILUDE HD
80W-90
TELLUS SPIRAX AX
OIL T / TX 80W/90
32.22
HYDRAULI HYPOID
OIL 32.22 80W/90
MULTIHY- HYPOIDI MP
DRAULI 22,
80W/90
SUPER 32
64
The grease nipples
The sliding surfaces
Chains
MULTIPURPOSE
GR MOLY
MOBILUX EP 2,
MOBIL GREASE
MP, SPECIAL
RETINAX EPX 2
RETINAX EP 2
MULTIPURPOSE
EP, MDS
MP GREASE,
MOLYGREASE