Kesla 2010 User Manual page 69

LUBRICATION POINTS:
Ref- Lubrication points
er-
ence
1 Turning device, oil eye
2 Turning device, the lower
plug
3 Turning device, the upper
plug
4 Joint and plain bearings
5 The extensions of the
external surfaces of the
6 Internal surfaces of the
extensions
7 Chains (2-extensions)
8 Chassis cables
Lubrication of the chassis cables
* Lubricant coolant-water mixture 50% / 50%
* The plug in the mounting sleeve of the top end of the cable is opened and from it coolant mix-
ture is poured into the cable. Alternatively, the entire cable can be disconnected.
Units Measure
1 Inspection
1 Drain, drain the water twice a
year
1 Filling, adding if necessary
20/22 Greasing by press
1/2 Grease / oil
1/2 Grease / oil
2 Grease / oil
4/5 Lubrication in icing conditions
63
MAINTENANCE
Lubrication inter-
vals/h
10
1000
1000
10
50 (SAE 10W50)
50 (SAE 10W50)
50 (SAE 10W50)
At least once a
month