Specifications; General Power Tool Safety Warnings; Save All Warnings And Instruc- Tions For Future Reference - Makita XPT02 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Impact driver mode
No load speed (/min) (Soft / Medium / Hard)
Impacts per minute (Soft / Medium / Hard)
Hammer drill mode No load speed (/min) (Low (1) / High (2))
Blows per minute (Low (1) / High (2))
Drill mode Drilling Capacities
(Low (1) / High (2))
No load speed (/min) (Low (1) / High (2))
Screwdriver mode Fastening Capacities
(Low (1) / High (2))
No load speed (/min)
(Low (1) / High (2))
Standard battery cartridge
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change with-
out notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

General power tool safety warnings

WARNING:
Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
Do not operate power tools in explosive atmo-
2.
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away while
3.
operating a power tool. Distractions can cause
you to lose control.
Model
Fastening Machine screw
Capacities
Standard bolt
High tensile bolt
Drilling Capacities / Concrete
Steel
Wood
Machine screw
Self drilling screw
Depends on torque
setting
P mode
Net weight
4 mm - 8 mm (5/32" - 5/16")
5 mm - 14 mm (3/16" - 9/16")
5 mm - 12 mm (3/16" - 15/32")
0 - 1,300 / 0 - 2,200 / 0 - 2,700
0 - 1,200 / 0 - 2,400 / 0 - 3,200
0 - 8,400 / 0 - 32,400
10 mm / 6.5 mm (3/8" / 1/4")
21 mm / 12 mm (13/16" / 15/32")
3.5 mm - 6 mm / 4 mm - 6 mm (1/8" - 1/4" / 5/32" - 1/4")
4 mm (5/32"), 5 mm (3/16") / 4 mm (5/32") (Thickness 3.2 mm (1/8") max.)
BL1815N/ BL1820B
1.5 kg (3.3 lbs)
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
When operating a power tool outdoors, use an
5.
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit inter-
rupter (GFCI) protected supply. Use of a GFCI
reduces the risk of electric shock.
2 ENGLISH
XPT02
0 - 700 / 0 - 2,700
8 mm (5/16")
0 - 700 / 0 - 2,700
0 - 300 / 0 - 1,100
0 - 600 / 0 - 2,300
BL1830/ BL1830B/ BL1840B/
BL1850B/ BL1860B
1.8 kg (3.9 lbs)
D.C. 18 V