Table of Contents
Advertisement
Pausing the operation
Touch the u field or open the appliance door.
1.
The operation is suspended and the u LED
flashes.
Close the appliance door.
2.
Touch the u field.
3.
The operation is continued and the u LED lights
up.
Stopping the appliance from heating
Turn the function selector to the "Off" position.
The appliance will stop heating and all the settings will
be cleared.
The fan may continue to run after the appliance
Note:
has been paused or stopped.
Setting the microwave to combined
operation
Y ou can combine the microwave function with all types
S e t t i n g t h e m i c r o w a v e t o c o m b i n e d o p e r a t i o n
of heating and the steam function. The appliance heats
up and the microwave is switched on at the same time.
As a result, the food is ready in a much shorter time.
Combination options
‹ Steam
■
3 Hot air
■
( Grill
■
4 Hot air grill
■
Exceptions:
ß Microwave setting, 1000 watts
3 Hot air 40 °C
Setting combined operation
Example: Hot air 3 190 ºC with microwave at 360 W,
17 minutes.
Use the function selector to set the Hot air 3
1.
function.
A default value for the temperature is displayed.
Turn the rotary selector to set the desired
2.
temperature.
Touch the microwave power output field · until the
3.
required level is selected in the display.
A default cooking time appears.
Set the cooking time using the rotary selector.
4.
Touch u.
5.
The operation starts and the u LED lights up. The
cooking time starts counting down.
The cooking time has elapsed
A signal sounds and the u symbol stops lighting up.
Combination mode has finished. Touch any field to end
the acoustic signal.
Changing the microwave power output
Touch · until the required level is selected in the
display.
Notes
Touching it several times switches the power levels
■
from the highest to the lowest level.
If the microwave function is only added after the
■
start, the appliance pauses. Press u to start
operation
Pausing the operation
Touch the u field or open the appliance door.
1.
The operation is suspended and the u LED
flashes.
Close the appliance door.
2.
Touch the u field.
3.
The operation is continued and the u LED lights
up.
Stopping the appliance from heating
Turn the function selector to the "Off" position.
The appliance will stop heating and all the settings will
be cleared.
The fan may continue to run after the appliance
Note:
has been paused or stopped.
Drying the cooking compartment
Dry the cooking compartment after operation to ensure
that no moisture remains.
Heating up the cooking compartment
To dry, heat up the cooking compartment so that the
moisture in the cooking compartment evaporates. Then
open the appliance door to allow the steam to escape
from the cooking compartment.
Allow the appliance to cool down.
1.
Remove the worst dirt from the cooking
2.
compartment immediately and wipe away moisture
from the cooking compartment floor.
Use the function selector to select Hot air grill 4
3.
Touch 0 twice.
4.
The cooking time symbol x is highlighted in the
display.
Use the rotary selector to set a cooking time of 15
5.
minutes.
Press u to start the operation.
6.
The drying function starts and ends automatically
after 15 minutes.
Open the appliance door and leave it open for 1 to 2
7.
minutes so that the moisture in the cooking
compartment can escape.
Drying the cooking compartment by hand
Allow the appliance to cool down.
1.
Remove any food remnants from the walls of the
2.
cooking compartment.
Dry the cooking compartment with a sponge.
3.
Leave the appliance door open for 1 hour so that the
4.
cooking compartment dries completely.
Microwave
en
19
Advertisement
Table of Contents
