Table of Contents
Advertisement
Messages on the unit's
display
F99
The unit fails to operate properly. Press [Í/I]
on the main unit for 3 seconds to switch the
unit to standby, then switch back on.
NET
While connecting to a network.
NO PLAY
There is a viewing restriction on a BD-Video
or DVD-Video. ( 35)
A DVD-Video disc with an incompatible region
code is inserted.
NO READ
The media is dirty or badly scratched. The
unit cannot play.
REMOVE
The USB device is drawing too much power.
Remove the USB device.
SET CODE ∏
("
" stands for a number.)
The remote control and this unit are using
different codes. Change the code on the
remote control.
Press and hold
[OK] and the
indicated number
button at the same time for more than
5 seconds.
U59
Temperature of this unit is hot and the unit
switches to standby for safety reasons.
Wait for about 30 minutes.
Install or place this unit with good ventilation.
START
A firmware update will start. Please do not
turn off the unit.
UPDATE /5
("
" stands for a number.)
A firmware update is in progress.
Please do not turn off the unit.
FINISH
The firmware update is complete.
Reference
- 42 -
Advertisement
Table of Contents
