Panasonic DPUB9000GN1 Operating Instructions Manual page 12

Enjoying audio with an amplifier connected to the DIGITAL AUDIO OUT/Analogue AUDIO OUT
terminals
Setting
Set the following items in the Setup menu ( 30):
≥ Set "HDMI(VIDEO) Output Mode" to "Automatic ( Video Only / Video+Audio )". ( 30)
≥ Set "HDMI(AUDIO) Output Mode" to "Audio Only". ( 30)
≥ To enjoy audio with an amplifier connected to the OPTICAL/COAXIAL terminal or 2ch AUDIO OUT
terminals:
Set "Audio Output" to "Off" in "Advanced Settings". ( 31)
≥ To enjoy audio with an amplifier connected to the 7.1ch AUDIO OUT terminals:
Set "Analogue Multi Channel" to "On". ( 33)
OPTICAL/COAXIAL (DIGITAL AUDIO OUT)
(Audio is not output from HDMI OUT terminal.)
2ch AUDIO OUT (Analogue AUDIO OUT)
BALANCED terminals
(Audio is not output from HDMI OUT terminal.)
Connect Balanced
cables to terminals
corresponding to
the terminals you
have connected.
AUDIO OUT terminals
Connect terminals of the same colour.
(Audio is not output from HDMI OUT terminal.)
Getting started
Optical digital cable
OR
Coaxial cable
Balanced cable
Audio cable
- 12 -
OPTICAL IN
Amplifier/receiver
COAXIAL IN
R
AUDIO IN
(BALANCED)
L
Amplifier/receiver
Match the polarities and
insert.
≥ Do not insert anything
other than balanced
cables. Doing so may
cause malfunction.
L
AUDIO IN
R
Amplifier/receiver