Panasonic DPUB9000GN1 Operating Instructions Manual page 28

Picture Settings
These settings are also displayed by pressing
[PICTURE SETTING].
Picture Settings
Optimum HDR Adjustment
The icon changes depending on
Luminance Adjustment
Colour Adjustment
the playback media.
Sharpness Adjustment
Noise Reduction
Reset to Default Picture Settings
e.g., Ultra HD Blu-ray
Switch "Set 1", "Set 2" or "Standard" by using
[2, 1].
≥ Settings for BD Video playback, Ultra HD
Blu-ray playback and settings for the playback
of other types of media are registered
separately.
(The default settings for "Set 1"/ "Set 2" are the
same as the settings for "Standard".)
≥ You cannot change the "Standard" settings.
∫ Display
Select a setting suitable for your screen.
∫ Picture Type
Select the picture quality mode during play.
∫ Optimum HDR Adjustment
This setting is also displayed by pressing and
holding [HDR SETTING] for more than
2 seconds. ( 21)
Adjust the brightness, tone curve (white/ black),
system gamma and the following settings:
≥ HDR Optimiser :
If "On" is selected, you can display highly bright
scenes with smooth gradations based on the
luminance information (HDR10 metadata) of
playback content.
– This function works only for HDR (PQ)
material.
– The effect may be enhanced by setting the
"HDR Display Type" that matches your TV in
the Setup menu. ( 31)
≥ Dynamic Range Adjustment :
Set the brightness of the entire screen when
outputting HDR (High Dynamic Range) video to
a connected HDR-compatible TV.
Ultra HD Ultra HD Ultra HD
Blu-ray Blu-ray Blu-ray
Set 1
Ultra HD Ultra HD Ultra HD
Blu-ray Blu-ray Blu-ray
Set 1
Playback
≥ DR Conversion Adjustment :
When this unit is connected to a TV that does
not support HDR (High Dynamic Range) input,
HDR video is output converting to a SDR
(Standard Dynamic Range) video signal. If you
set a smaller value, their contrast will be
reproduced more faithfully, but the entire screen
will appear darker. To increase the brightness,
set a larger value.
∫ Luminance Adjustment
Adjust the contrast, brightness, tone curve (white/
black) and system gamma.
∫ Colour Adjustment
Adjust the colour saturation and hue.
∫ Sharpness Adjustment
Adjust the sharpness of images. The greater the
value is, the sharper images will be.
∫ Noise Reduction
Reduce unnecessary noise in videos. The greater
the value is, the less noise will appear.
∫ Bandwidth Limitation
Adjust the bandwidth limitations.
∫ Progressive
Select the method of conversion for progressive
output to suit the type of material being played.
≥ If the video is disrupted when "Auto" is selected,
select either "Video" or "Film" depending on the
material to be played back.
∫ Reset to Default Picture Settings
Return "Picture Settings" of the selected tab
("Set 1" or "Set 2") to the factory preset.
- 28 -