Master Spas Michael Phelps Signature Swim Spas Owner's Manual page 55

SWIM SPA CONTROLS - ICON SPA TOUCH
THE MAIN SCREEN
ICON SPECIFICATIONS
1. = High Temperature Range
2. = Ready Mode
3. = Filter1 Mode
4. = Ozone is Running. If you don't see the icon that means the Ozone is OFF.
5. = Cleanup Cycle is Running. If you don't see the icon that means the Cleanup Cycle is OFF.
6. = Wi-Fi Icon just indicates that the optional Wi-Fi module is connected to the swim spa
system. It does not indicate signal strength.
7. Lock Icon:
When displayed, indicates the panel is in a locked mode.
There are 2 lock icons that can be shown on the title bar of most screens. A lock icon with
an 'S' means that a settings lock has been applied. It is shown on screens that are af-
fected by the settings lock. And a lock icon with a 'P'
If both settings and panel are locked, only the panel lock will show since it overrules just
settings being restricted. When the panel is locked, the Settings Menu Screen will only
show items not affected by that lock (System Info and Lock Screens).
To unlock or lock a setting or panel lock, you press the corresponding icon that is locked
and then press and hold the word "Lock" in the title bar for 5+ seconds until the text and
icon change to the opposite state.
8. = Invert (or flip) Screen
9. = Set Temperature Up: Adjust set temperature higher.
10. Current water temperature: Displays current water temperature.
11. Temperature Scale: Indicates if the temperature is in
12. = Set Temperature Down. Adjust set temperature lower.
13. Message Waiting Indicator. The Message Waiting Indicator will show one of the
following icons:
= Critical Error (Swim spa can't function until it's fixed)
= Normal Error or Warning
= Reminder Message
= Information Message
Touch the Indicator to go to a Message Screen which shows the message.
Some messages will include the "Call for Service" text as it requires a service technician to
fix the problem. If the panel is locked and a message alert appears, you will be taken to the
UNLOCK screen before you can clear the message.
Touching the Error/Warning/Reminder/Info Icon on the Message Screen will take you to
the System Information Screen to allow for troubleshooting over the phone or for a field
service tech to better understand what is going on. Exiting the System information Screen
will take you back to the Message Screen in that situation.
14. = Heat Indicator. Indicates the heating process and when the swim spa heater is on.
DO NOT DIVE. DO NOT DIVE.
= Low Temperature Range
= Ready And Rest Mode
= Filter2 Mode
= Rest Mode
= Filter1 and 2 Mode
means the Panel has been locked.
= Fahrenheit or
102 53
C
= Celsius.