Screw (quantity)
6-32*3.8 mm, Zn coated (3)
Storage fan assembly
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the left side cover. See "Left side cover" on page 72.
2. Remove the right side cover. See "Right side cover" on page 97.
3. Disconnect the storage fan cable from the system board. See "System board" on page 60.
Removal steps
Remove the storage fan assembly.
Color
Blue
Torque
3.0 ± 0.5 lb/in
.
Chapter 7
Hardware removal and installation
103