EUFY S220 SoloCam - Camera Quick Start Guide

PRODUCT OVERVIEW

T8134 S220 SoloCam

1. Solar Panel
2. Photosensitive Sensor
3. Microphone
4. Camera Lens
5. LED Indicator
6. Motion Sensor
7. Speaker
8. SYNC Button
9. USB-C Charging Port
10. Mounting Hole

CHARGING SOLOCAM

LED Indicator

SETTING UP SOLOCAM

Download the App and Set Up the Device

1. Download and install the eufy Security app, and sign up for an account.
   
   
   
2. Follow the on-screen instructions to add your SoloCam.

MOUNTING SOLOCAM

Select a Location
S220 SoloCam can be mounted on a wall. Select a location where it achieves the desired view. We recommend mounting it 7-10 ft (2-3 m) above ground level.
To maximize the solar panel efficiency, select a location where S220 SoloCam receives plenty of sunlight.

Mount S220 SoloCam
S220 SoloCam can be mounted both indoors and outdoors.

1. Loosen the cover of the mount by turning it counterclockwise and disassemble the mount.
   
2. This step applies if mounting onto hard surfaces such as brick or concrete. For soft surfaces such as wood, skip this step. Drill holes with a 15/64 in (6 mm) drill bit, then insert the anchors into the holes.
   

3. Firmly screw the base of the mount onto the wall. Reassemble the mount.
   
   
4. Screw SoloCam onto the mount. Ensure the solar panel is facing the sky. Position SoloCam to achieve the desired view, checking it using the live stream in the eufy Security app.
   

For troubleshooting, check the Help section in the eufy Security app.

CUSTOMER SERVICE

12-month limited warranty

(US) +1 (800) 988-7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
( 中国 ) +86 400 0550 036
( 日本 ) +81 03 4455 7823
(AU) +61 3 8331 4800
(Egypt) +20 8000000826
(UAE) +971 8000320817
(Kuwait) +965 22069086
(Saudi Arabia) +966 8008500030
(Middle East & Africa) +971 42428633

support@eufylife.com

Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,
Kowloon, Hong Kong
@EufyOfficial
@EufyOfficial
@EufyOfficial