Akko 3068 Keyboard Manual

3068 Technical Specifications

3068 HotKeys

3068 System Commands

Lock Windows Key Press Fn and left Win key

Restore Factory Settings Hold down Fn and press~key

3068S Single-Color Backlight

*Backlight function is only available on the backlight version of 3068s.

Fn+Del
Lighting effects cycles among Steady / Breathe / One-key light up / One-key light off Wave / Ripple / Raindrop

The adjustments on the left is for generic lighting effects. Some lighting effects cannot be tweaked. For example, effects with constant light can only adjust brightness as they don't have animation speed and direction.

Akko Macro V1.0 Macro Setup Instruction 1

1. Akko Macro V1.0 is hardware-based and works without software-driven.
2. The following keys cannot be programmed: "Esc", "Fn", "Left Win".
3. Press and hold Fn + Win for 3 seconds to switch to the Macro mode. When the keyboard is re-connected or the system is restarted, the Macro mode will be exited. You need to switch to the Macro mode again to use programmed keys.
4. Akko Macro V1.0 does not support simultaneous trigger, that is, pressing "AB" at the same time will trigger the two keys in the order of A followed by B.
5. Akko Macro V1.0 does not support customized interval time, that is, the trigger interval between key A and key B cannot be defined and will follow the system's default trigger time.

Akko Macro V1.0 Macro Setup Instruction 2

Akko Macro V1.0 Macro Setup Instruction 3

Macro Recording Example: Define" A" as" AKKOGEAR"

Step 1: Press Fn + left Win for 3 seconds to enter the Macro mode.

Step 2: Press Fn + ESC to launch Macro editor.

Step 3: Press Fn + A. This means we choose key" A" to record.

Step 4: Press A, K, K, O, G, E, A, R in order as replacement definition of" A".

Step 5: Press Fn + A again to end the Macro recording of key" A". At this point, pressing" A" in notepad will display" AKKOGEAR". If you want to create a Macro for key" B", press Fn + B to start the Macro recording.

Step 6: Press Fn + Esc to exit Macro editor. Under the Macro mode, you can configure the keys and Macros you set.

Step 7: Press and hold Fn + Left Win for 3 seconds to exit the Macro mode and return to the default key definition.

Akko Warranty and Service Statement

1. Akko provides 1-yr warranty for customers in mainland China. For other regions, please contact your seller (Akko distributor) for specific warranty policy.
2. If the warranty window expires, customers need to pay for repairs. Akko will also provide instructions if usersprefer to repair the keyboard by themselves. However, users shall take full responsibility for any loss happened during self-repair.
3. Dissembling the keyboard without manufacturer/seller's instruction will immediately void the warranty.
4. The return and warranty policy may vary in different platforms and are subject to the specific distributor at the time of purchase.

Precautions Man-made damage is not limited to immersion, falling off, and pulling off the wires with excessive forces, etc.

instagram.com/akkogear
facebook.com/akkogear

www.akkogear.com

Videos

Akko 3068 Keyboard Review Video

Documents / Resources

References

• Akko艾酷官方网站 | 潮流时尚外设_Akko机械键盘官网
• Login • Instagram
• Facebook

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Akko 3068 Keyboard Manual