Table of Contents
Advertisement
Targus ExpressCard Notebook Docking Station with Digital Video and Audio
Click Finish and restart your computer when prompted by the
docking station's installation software. In order to install the driver
files properly, you must make sure the installation is completed
before restarting the computer.
WINDOWS VISTA WILL PROMPT A MESSAGE BOx TO RESTART THE COMPUTER
DURING THE DRIVER INSTALLATION PROCESS. PLEASE IGNORE THIS
MESSAGE. THE DOCKING STATION'S DRIVER INSTALLATION SOFTWARE WILL
PROMPT THE RESTART MESSAGE WHEN INSTALLATION AND DRIVER SETUP
IS COMPLETED.
Window Vista - restart screen
5. After restarting, the computer will recognize the docking station
and the default drivers will automatically finish installing for
each of the devices. Please wait until this process is completed.
The screen's resolution will adjust and refresh during this
process.
NOTE: THIS SETUP PROCESS WILL REQUIRE SOME TIME FOR THE DRIVERS TO
INSTALL PROPERLY. IT MIGHT TAKE UP TO 5 MINUTES OR MORE DEPENDING
ON YOUR COMPUTER'S CONFIGURATION.
6. You will see a Targus Display logo icon located on the system
tray. The monitor mode selection can be set by right clicking on
this icon.
NOTE: IT IS RECOMMEND TO SET THE MODE TO "ExPRESS CARD VGA" OFF
WHEN USING ONLY ONE MONITOR. THE DEFAULT SETTING IS "ExTENDED
MODE".
Docking station - restart screen
Advertisement
Table of Contents
