Viatom Wellue BP2, BP2A - Automatic Upper Arm Blood Pressure Monitor Quick Guide

Overview

1. Start/Stop button
2. Function button
3. Display screen
4. LED indicator
5. ECG electrode
6. Charging cable connector

Blood Pressure Measurement

Applying the Arm Cuff

Remove tight-fitting clothing from your left upper arm. Do not place the arm cuff over thick clothes. Wrap the cuff around the upper arm, about 1 to 2 cm above the inside of the elbow, as shown.

Note: Keep the monitor wearing position aligned with the middle finger.

How to Sit Correctly

Place your arm on a table so the cuff is level with your heart.

Measuring Blood Pressure

1. Power on the blood pressure monitor.
2. Press Start/Stop button to start blood pressure measurement.
3. The monitor will automatically deflate the cuff slowly during measurement.
4. The readings will be displayed when the measurement finished.

Note: During measurement, you should keep still and do not squeeze the cuff.

Blood pressure result screen

Recording ECG

There are four methods for recording ECG by cable free operation.
Note: The recording ECG feature is only available for the BP2 model.

To start an ECG Recording:

1. Put your right palm on the right side electrodes of the Monitor.
2. Put the left side electrodes to the body position that you desired to measure.
3. Once the body parts are placed on the electrodes, press Function button to start the EKG recording.
4. The readings will come after 30 seconds.

Recording ECG screen
Note: You can get different signal amplitude from the different methods. Use method A or method C if signal is too low in method B.

Download the App

App name: ViHealth
iOS: App Store
Android: Google Play


DO NOT pair the device in your smart device's settings.

Contact us: service@getwellue.com
Website: www.getwellue.com