Page 3
“ kg (lbs) 0,7 (1.54) 0,8 (1.79) 0,53 (1.2) *2) 2006/42/EC *3) EN ISO 12100:2010, EN 1953:2013 2015-11-10, Volker Siegle Direktor Produktentstehung & Qualität (Vice President Product Engineering & Quality) *4) Metabowerke GmbH - Metabo-Allee 1 - 72622 Nuertingen, Germany...
Page 4
- Only qualified, trained operators are authorised to install, adjust or use the air tool. SSP 1000: This compressed air sand blasting gun - The air tool must not be modified. Any modifica- is intended for the removal of rust and paint/varnish...
Page 5
ENGLISH Risks associated with recurring move- be selected, maintained and replaced in accord- ments ance with these instructions. - Use protective breathing apparatus in accordance - When working with the air tool, you may experi- with your employer instructions or in accordance ence an uncomfortable sensation in your hands, with health and safety regulations.
Page 6
Adjusting the air tool that only suitable compressed air is used! Information in these operating instructions is cate- (Only for SSP 1000) gorised as shown below: The jet pressure of the jet nozzle can be changed Danger! Risk of personal injury or environ- depending on the workpiece and air pressure.
Page 7
Care inal Metabo spare parts! If you have Metabo air tools that require repairs, Danger! Disconnect the compressed air con- please contact your Metabo service centre. For nection before carrying out any work.
Need help?
Do you have a question about the SSP 1000 and is the answer not in the manual?
Questions and answers