Table of Contents
Advertisement
Remove user: You can delete an existing user's account in this
option. Check the box associated to the user you want to delete
and click Apply.
Modify user: You can change the password of an existing user's
account. Select the radio button associated to the user you want
to modify and click Apply. Enter the original password in the Old
password box, and then enter a new password twice in the New
password and Retype new password boxes. When completed,
click Apply.
User list: Click this item to display the existing users of the
storage server.
NOTE:
1. The storage server uses four pre-defined accounts in the
firmware, which cannot be used as the users' account
names, including: root, admin, ftp, and nobody.
2. The password must be longer than five characters.
- 29 -
Advanced
Session
The Session submenu allows you to set up the Workgroup name for
the storage server, and change the name and description of the storage
server. You can also manage the session in this submenu.
Advanced Menu – Session
Add Session: You can add the tasks in these relative options
(see the illustration on page 31).
- Basic Setup: Click Open to assign a destination folder in the
Path option; you can give a brief instruction in the Comment
box; finally, select the Authority type.
- Access Control: You can allow all users or assign the specific
user to control the storage server.
- 30 -
Advertisement
Table of Contents
