Advertisement
TOOLS REQUIRED: Hex Key (included) & Phillips-head Screwdriver (not included) • Follow the Assembly Steps in the order presented.
1
PIECES
⁕
REQUIRED:
Phillips-head
screwdriver
U
H r
]
U
H b
]
U µ4
H p
]
interchangeable
H p
]
l µ4
interchangeable
]
H r
L
]
H b
L
H c
]
L
7364 — 05 /23 — A4.2
Dark Tower
MODEL
7 64
ASSEMBLY
#
Instructions online at www.prevuepet.com
UPPER HIDEAWAY
NOTE: Base (bottom)
x 16
has countersunk holes
and threaded screw
holes in the corners
U
]
H c
assemble the upper
hideaway as illustrated
using phillips-head screws.
LOWER HIDEAWAY
NOTE: Center
hole with
threaded
insert
NOTE: Countersunk
holes face DOWN
assemble the lower
hideaway as illustrated
using phillips-head screws.
For more wonderful cages, toys, and accessories for cats, birds, chickens, rabbits, ferrets, dogs and small animals, visit www.prevuepet.com
NOTE: Base (top) has
fabric on top and
side surfaces
base
2
Align the holes
in the hideaway
roof and cover
fabric.
base
NOTE:
Base (top) has
fabric on top and
side surfaces
2
Align the holes
in the hideaway
roof and cover
fabric.
CUSTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE
1 (312) 243-3624
ONLINE www.prevuepet.com
EMAIL
customerservice @ prevuepet.com
roof
NOTE: Offset through-hole
(for daybed post)
3
roof
NOTE: Center through-hole
3
NOTE: Countersunk
holes face UP
NOTE: Entire roof
panel is
uncoated
Pull the cover down
under the base. The
elastic will pull the
cover tight. Align
seams with corners.
NOTE: Countersunk
holes face UP
NOTE: Entire roof panel
is uncoated
Pull the cover down
under the base. The
elastic will pull the
cover tight. Align
seams with corners.
Advertisement
