Clevo N870EJ1 Service Manual page 32

Disassembly
5. Remove screws
Figure 4
6. Slightly lift and pull the hard disk assembly in the direction of arrow
HDD Assembly
7. Lift the hard disk assembly
Removal (cont'd.)
8. Remove screws
9. Reverse the process to install a new hard disk (do not forget to replace the screws).
d. Remove the screws.
e. Slightly lift and pull the
HDD in the direction of
d.
the arrow.
f. Lift the HDD assembly
out of the bay.
g. Remove the screws and
bracket from the HDD.
g.
27

24. HDD Assembly
28. Bracket
29. HDD
• 2 Screws
2 - 8 Removing the Hard Disk Drive
from the HDD assembly
22
out of the bay
24
-
and bracket
26 27
3
22
26
28
29
(Figure 4b).
(Figure 4c
23
).
(Figure 4d
25
from the hard disk (Figure 4e
28 29
e.
23
24

HDD System Warning
New HDD's are blank. Before you begin make
sure:
You have backed up any data you want to keep
from your old HDD.
You have all the CD-ROMs and FDDs required
to install your operating system and programs.
If you have access to the internet, download the
latest application and hardware driver updates
for the operating system you plan to install. Copy
these to a removable medium.
).
)
.
f.
25
24