Download Print this page
Racking Solutions CRCU003 Assembly Instructions

Racking Solutions CRCU003 Assembly Instructions

Household 3 tier chrome shelving

Advertisement

Quick Links

Household 3 Tier Chrome Shelving
Please inspect box contents to ensure you have received all components.
Note: the black circular plastic tops in between the shelves are used only for
packaging purposes. They are NOT NEEDED. Please discard responsibly &
keep away from small children.
Each shelf holds up to 160 kg with equal weight distribution on
Total weight capacity of shelving rack is 480 kg on feet levelers.
HELP LINE
01977 555007
PACKAGE CONTENTS
AX3
Shelf
extra Slip sleeve
DX4
Bottom Pole (with threaded insert
and feet leveler pre-installed)
ASSEMBLY INSTRUCTIONS
CRCU003
BX24+2
Top Pole (with end cap and
pole connector pre-installed)
EX4
Feet Leveler
!
leveling feet.
!
CX4
Informa on
if in doubt contact the supplier
Please read these instruc ons
throughly before commencing
assembly.
Inspect all packages for damage and
check that all components have been
supplied
Assembly should be undertaken by
at least two people
Cau on
During Assembly
Wear appropriate clothing -protec ve
gloves and footwear are
recommended
Dispose of packaging materials
responsibly
Make sure the floor is level
Allow adequate working space and be
aware of others working around you
Take care when handling heavy items
par cularly when li ing or stretching
Warning
Rules for safe use of shelving
Not suitable for use in damp or wet
environments.
ENSURE THAT THE MAXIMUM LOAD
CARRYING CAPACITIES ARE NOT
EXCEEDED
Shelves must be loaded evenly, and load
heavier items on the bo om shelves
Never climb or stand on the shelves.
TOOLS REQUIRED
Rubber Mallet

Advertisement

loading
Need help?

Need help?

Do you have a question about the CRCU003 and is the answer not in the manual?

Questions and answers

Summary of Contents for Racking Solutions CRCU003

  • Page 1 Please read these instruc ons Household 3 Tier Chrome Shelving throughly before commencing assembly. CRCU003 Inspect all packages for damage and check that all components have been supplied Assembly should be undertaken by at least two people...
  • Page 2 ASSEMBLY INSTRUCTIONS STEP 1: SLIP SLEEVES STEP 4: INSTALLING REMAINNING SHELVES Repeat step 1 & step 2 to install remaining Shelves (A) as desired. On the Pole (D), place 1 pair of slip sleeves (B) at the desired level. Please make sure the arrow faces up and that the word “top” is right side up.