Racking Solutions WD001 Assembly Instructions

Bronze 2-Tier Wardrobe
Please inspect box contents to ensure you have received all components.
Note: the black circular plastic tops in between the shelves are used only for
packaging purposes. They are NOT NEEDED. Please discard responsibly
HELP LINE
& keep away from small children.
Total weight capacity is 270 kg on casters.
01977 555007

PACKAGE CONTENTS

AX2
Shelf
DX4
Top Pole (with end
cap pre-installed)
GX28+2
extra Slip sleeve
ASSEMBLY INSTRUCTIONS
WD001
BX2
Bottom Pole (with pole connector
Hanging Pole
and threaded insert pre-installed)
EX2
Swing Arm
CX4
FX4
Casters
(2 locking; 2 non-locking)
if in doubt contact the supplier
Please read these instructions
throughly before commencing
Information
assembly.
Inspect all packages for damage and
check that all components have been
supplied
Assembly should be undertaken by
at least two people
During Assembly
Wear appropriate clothing -protective
gloves and footwear are
!
Caution
recommended
Dispose of packaging materials
responsibly
Make sure the floor is level
Allow adequate working space and be
aware of others working around you
Take care when handling heavy items
particularly when lifting or stretching
Rules for safe use of shelving
Not suitable for use in damp or wet
!
environments.
Warning
ENSURE THAT THE MAXIMUM LOAD
CARRYING CAPACITIES ARE NOT
EXCEEDED
Shelves must be loaded evenly, and load
heavier items on the bottom shelves
Never climb or stand on the shelves.

TOOLS REQUIRED

Rubber Mallet