Next Higher Bank> (When Daisy-Chained); Autoscan Beep Sound On/Off; Reflash Eeprom - TRENDnet TK-1602R User Manual

TK-802R_TK-1602R Rack Mount KVM Switch
<Next Higher Bank> (when daisy-chained)
Front Panel Button
Press the corresponding button.
Hotkeys
Next bank
OSD
While the OSD is activated on the console screen, press the Page Down key to
rotate through the bank selection incrementally.
<Autoscan Beep Sound On/Off>
While Autoscanning, a beep sound will serve to confirm channel switching. If you
want to turn on/off this beeping, then try the following hotkey sequence.
Note that while you are switching channel manually either by hotkey or front-panel push
button, the beep sound is always on, and cannot be turned off.
Hotkey
Beep sound on/off =
<Reflash EEPROM>
While you can freely change the computer names, autoscan time as well as
password, there might be times when you want to restore the switch to its default
factory settings. If this is the case, you can always press the hotkey sequence for
an EEPROM Reflash.
Note that Reflash EEPROM will not affect your password setting, thus won't compromise
your KVM Switch access security.
Hotkey

Reflash EEPROM =

As soon as the hotkey sequence is executed, the following OSD screen dialog
appears to prompt you for a confirmation. Press Enter to confirm the EEPROM
Reflash directive.
Note that, except the hotkey sequence ScrLk + ScrLk + R, there is no option on the OSD Main
Menu to evoke the OSD Reflash function.
User's Guide
Scr
=
Lk
Scr
Lk
Scr
Lk
REFLASH EEPROM ? ( YES )
ESC ESC QUIT QUIT
Page 23
Page
Scr
Down
Lk
Scr
B
Lk
Scr
R
Lk
Enter Enter SELECT SELECT
July,2004
Chapter 3 Operation