Bosch Professional GWS 18V-125 PSC Original Instructions Manual page 21

OBJ_BUCH-3458-001.book Page 22 Wednesday, November 15, 2017 10:48 AM
22 | English
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
 Use the battery only in conjunction with your Bosch
product. This measure alone protects the battery against
dangerous overload.
 The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
 Caution! When using the power tool with Bluetooth®,
interference can occur with other devices and equip-
ment, aircraft and medical devices (e.g. pacemakers,
hearing aids). Also, damage to people and animals in
the immediate vicinity cannot be completely excluded.
Do not use the power tool with Bluetooth® near medical
devices, petrol stations, chemical plants, in areas
where there is a danger of explosion and where blast-
ing takes place. Do not use the power tool with Blue-
tooth® in aircraft. Avoid using the product near your
body for extended periods.
The Bluetooth® word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cence.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for cutting, roughing and brushing of
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.
With the Bluetooth® Low Energy Module GCY 30-4 inserted,
data and settings of the power tool can be transferred be-
tween the power tool and a mobile terminal device by means
of Bluetooth® wireless technology.
1 609 92A 47G | (15.11.17)
GWS 18V-125 PSC:
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Release lever for protection guard
2 Direction-of-rotation arrow on housing
3 Spindle lock button
4 User interface (GWS 18V-125 PSC)
5 On/Off switch
6 Unlocking lever for on/off switch
7 Battery pack*
8 Battery unlocking button*
9 Cover for Bluetooth® Low Energy Module GCY 30-4
10 Auxiliary handle (insulated gripping surface)
11 Grinder spindle
12 Protection guard for grinding
13 Mounting flange with O-ring
14 Grinding wheel*
15 Clamping nut
16 Quick-clamping nut * (M14)
17 Protection guard for cutting*
18 Cutting disc*
19 Hand guard*
20 Rubber sanding plate*
21 Sanding sheet*
22 Round nut*
23 Cup brush*
24 Button for charge-control indicator (GBA 18V...)*
25 Battery charge-control indicator (GBA 18V...)*
26 Handle (insulated gripping surface)
27 Cutting guide with dust extraction protection guard *
28 Diamond cutting disc*
29 Battery status indicator (User interface)
30 Speed preselection level indicator (User interface)
31 Speed preselection button (User interface)
32 Power tool status indicator (User interface)
33 Overload protection indicator (User interface)
34 Button for charge-control indicator
(GBA 18V 6.3Ah/ProCORE18V...)*
35 Battery charge-control indicator
(GBA 18V 6.3Ah/ProCORE18V...)*
36 LED work light (GWS 18V-125 PSC)
37 Diamond core cutter*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Bosch Power Tools