Table of Contents
Advertisement
3. Close the door.
4. Switch on ON/OFF switch (.
5. Hold down programme button #
and press START button P until
•:‹.... is indicated on the digital
display.
6. Release both buttons.
The LED for button # flashes and
the digital display )" displays the
factory setting •:‹....
To change the setting:
1. Press programme button 3.
Each time the button is pressed, the
when the value of •:‹ˆ has been
set value increases by one level;
to •:‹‹ (off).
reached, the display jumps back
2. Press START button P.
The chosen setting has now been
stored.
Water hardness table
Water softening system/Special salt
Using special salt
Always refill with special salt
immediately before switching on the
appliance. This ensures that overrun
special salt solution is immediately
washed out and does not corrode the
rinsing tank.
1. Open the screw-type cap of the
compartment 1J.
2. Fill the tank with water (only required
when switching on the appliance for
the first time).
3. Then add dishwasher salt (not table
salt or tablets).
The water is displaced and runs out.
As soon as the salt refill indicator `
on the fascia is lit, top up the salt.
* depending on model
en
11
Advertisement
Table of Contents
