Table of Contents
Advertisement
(Ethernet cable**).
2 - Make sure that the router is switched on.
3 - The TV constantly searches for the network
connection.
4 - A message will be shown when the connection is
successful.
If the connection fails, you can check the DHCP
setting of the router. DHCP should be switched on.
**To fulfill EMC regulations, use a shielded FTP Cat.
5E Ethernet cable.
Settings
View Network Settings
Press // Home > Settings > Wireless
and Networks > Settings > View Network Settings.
You can view all current network settings here. The IP
and MAC address, signal strength, speed, encryption
method, etc.
Network Configuration - DHCP / Static IP
Press // Home > Settings > Wireless
and Networks > Settings > Network Configuration >
DHCP / Static IP .
Select DHCP or, if you are an advanced user, you can
setup your network with static IP addressing.
Network Configuration - Static IP Configuration
Press // Home > Settings > Wireless
and Networks > Settings > Static IP Configuration.
1 - Select Static IP Configuration and configure the
connection.
2 - You can set the number for IP
Address, Netmask, Gateway, DNS 1, or DNS 2.
Wake on LAN (WoL)
Press // Home > Settings > Wireless
and Networks > Settings > Wake on LAN (WoL).
Disable/Enable Wake on LAN (WoL). You may wake
up TV using an external device on the same LAN.
Wake on Wi-Fi (WoWLAN)
Press // Home > Settings > Wireless
and Networks > Settings > Wake on Wi-Fi
(WoWLAN).
Disable/Enable Wake on Wi-Fi (WoWLAN). You may
wake up TV using an external device on the same Wi-
Fi.
Network Type
Press // Home > Settings > Wireless
and Networks > Settings > Network Type.
• Wired - Connecting to a wired network.
• Wireless - In the list of found networks, select on
your wireless network. If your network is not in the list
because the network name is hidden (you switched
off the SSID broadcast of the router), select Add New
Network to enter the network name yourself.
• WPS - If your router has WPS, you can directly
connect to the router without scanning for networks. If
you have devices in your wireless network that use
the WEP security encryption system, you cannot use
WPS.
• WPS with PIN code - If your router has WPS with a
PIN code, you can directly connect to the router
without scanning for networks. If you have devices in
your wireless network that use the WEP security
encryption system, you cannot use WPS.
Google Account
Sign In
To enjoy the full capabilities of your Philips Android
TV, you can sign in to Google with your Google
Account.
By signing in you'll be able to play your favourite
games across phone, tablet and TV. You'll also get
customised video and music recommendations on
your TV home screen as well as access to YouTube,
Google Play and other apps.
Use your existing Google Account to sign in to
Google on your TV. A Google Account consists of an
email address and a password. If you don't have an
Google Account yet, use your computer or tablet to
create one (accounts.google.com). To play games
with Google Play, you need a Google+ profile. If you
did not sign in during the first TV installation, you can
always sign in later.
Sign In
Press Home > Apps > Google Play.
With the on-screen keyboard, enter your email
address and password, press the same OK key to
sign in.
Android Settings
You can set or view several Android specific settings
or information. You can find the list of apps installed
on your TV and the storage space they need. You can
set the language you like to use with Voice
Search. You can configure the onscreen keyboard or
allow apps to use your location. Explore the different
Android settings. You can go
to
www.support.google.com/androidtv
information on these settings.
To open these settings
28
for more
Advertisement
Table of Contents
