Specifications; Preparation For Use; Instruction For Use; Maintenance - MTX FHS-2000 User Manual

Item / Model
Network parameters, V ~ Hz
Rated power in mode I/II, W
Overheat protection
Rollover protection
Temperature controller
Electrical protection class
Weight (net/gross)
Unpack the fan heater, check it for damage to the case, power cord, controls.
Forbidden to use damaged device.
Forbidden to use device at low temperatures.
Install fan heater at the distance of at least 0.5 m from walls and foreign objects. On flat hard surface.
Not place the appliance in front of the outlet.
Air flow direction should ensure optimal heat distribution in the room.
Set temperature controller to
Connect power cord to the mains.
If you want only the fan to work, select mode
For use warm air mode, turn mode switch to
For use hot air mode, torn mode switch to
Set temperature controller to maximum position for quick room heating.
When desired temperature is reached, turn temperature controller to lower temperature.
For turn off fan heater set mode switch to
WARNING!
Carry out all maintenance work on fan heater with the power off. Wait for fan to cool.
Fan heater not need special maintenance. Clear regularly. To avoid electric shock, not clean fan heater with
water or immerse it in water. Fan heater body can be wiped with slightly damp cloth. Not use abrasives to clean
appliance.
If necessary, you can clean air outlet openings from dust particles accumulating in them with vacuum cleaner.
There are no parts inside fan heater that require replacement. Not open fan heater body, as the motor and
heating element may be damaged. In case of product breakdown or failure, recommend contacting with shop
where was purchase made.
SPIRAL ELECTRIC FAN HEATER

SPECIFICATIONS

96413 / FHS-2000
230~ 50
1000 / 2000
Yes
No
Yes
II
0,9/1

PREPARATION FOR USE

INSTRUCTION FOR USE

, mode switch to .
.
.
.
and unplug the appliance.

MAINTENANCE

TROUBLESHOOTING

10