Advertisement
Quick Links
EC DECLARATION OF CONFORMITY
Date of issue: 1 September 2018
Reference batch number: ....................................
(to be entered by the customer)
Directive:
Machinery Directive 2006/42/EC as amended by Directive 2009/127/EC
Conforming apparatus:
Product: Halfords 2 Tonne Low Profile Hydraulic Trolley Jack
Model: TH22502
Item code: 657099
Manufacturer:
Halfords Limited, Icknield street Drive, Redditch, Worcestershire, B98 0DE
Harmonised standards referenced or applied:
EN1494:2000 + A1:2008 Mobile or movable jacks and associated lifting equipment
The Supply of Machinery (Safety) Regulations 2008 Statutory instrument 2008
No.1597
The Supply of Machinery (Safety) (Amendment) Regulations 2011 Statutory
instrument 2011 No.2157
Halfords Limited hereby declare that the machine described below is both in its basic design
and construction and in the version marketed by us conforms to the relevant safety and health
related requirements of the appropriate EC Directives. This declaration shall cease to be valid
if modifications are made to the machine without our approval.
Date of placement onto market: September 2018
Signed....................................................................
1 September 2018
CONTACT US
Halfords Ltd, B98 0DE.
www.halfords.com
Produced for Halfords
CHRIS HALL
Head of Quality
2 TONNE LOW PROFILE
HYDRAULIC TROLLEY JACK
SWL (SAFE WORKING LOAD) UP TO 2 TONNE (2,000KG)
LOW PROFILE
lifting
for improved
capacity
access
Item Code: 657099
Model: TH22502
INTRODUCTION
For your safety please read this manual before using any lifting equipment ensuring you fully
understand its operation and the safety procedures to be observed.
Ensure this manual is retained for future reference and that new users of this product read and
understand the content before they use the product.
GUARANTEE
This product is guaranteed by Halfords against manufacturing defects for a period of 12 months
from the date of purchase. This does not affect your statutory rights.
Should you experience a problem please return the product, together with the receipt and this
manual to your nearest Halfords store.
HAL1478/35812
INSTRUCTION MANUAL
minimum
maximum
height
height
Advertisement
Related Manuals for Halfords TH22502
Summary of Contents for Halfords TH22502
- Page 1 The Supply of Machinery (Safety) (Amendment) Regulations 2011 Statutory instrument 2011 No.2157 Halfords Limited hereby declare that the machine described below is both in its basic design and construction and in the version marketed by us conforms to the relevant safety and health related requirements of the appropriate EC Directives.
- Page 2 WARNING FOR YOUR SAFETY AND TO PREVENT INJURY: Failure to comply with these instructions can cause serious injury and damage to the vehicle. If you are in any way unsure, do not attempt to use this product and consult Use Service Jack For a qualified mechanic Lifting purposes 1.
- Page 3 5. Once the axle stands are properly located, VERY SLOWLY turn the release valve anti- clockwise until the vehicle begins to lower onto the stands. Lower the vehicle slowly so as not to shock load the jack stands. 6. BEFORE GOING UNDER THE VEHICLE ensure that all axle stands and chocks are correctly Trouble Shooting Check List in place and there is no chance of the vehicle becoming unstable.