Advertisement
Quick Links
EC DECLARATION OF CONFORMITY
Date of issue: 1 September 2018
Reference batch number: ....................................
(to be entered by the customer)
Directive:
Machinery Directive 2006/42/EC as amended by Directive 2009/127/EC
Conforming apparatus:
Product: Halfords Advanced 2 Tonne Low Profile Trolley Jack
Model: TH32505B
Item code: 657305
Manufacturer:
Halfords Limited, Icknield street Drive, Redditch, Worcestershire, B98 0DE
Harmonised standards referenced or applied:
EN1494:2000 + A1:2008 Mobile or movable jacks and associated lifting equipment
The Supply of Machinery (Safety) Regulations 2008 Statutory instrument 2008
No.1597
The Supply of Machinery (Safety) (Amendment) Regulations 2011 Statutory
instrument 2011 No.2157
Halfords Limited hereby declare that the machine described below is both in its basic design
and construction and in the version marketed by us conforms to the relevant safety and health
related requirements of the appropriate EC Directives. This declaration shall cease to be valid
if modifications are made to the machine without our approval.
Date of placement onto market: September 2018
Signed....................................................................
CHRIS HALL
Head of Quality
1 September 2018
CONTACT US
Halfords Ltd, B98 0DE.
www.halfords.com
Produced for Halfords
2 TONNE LOW PROFILE
HYDRAULIC TROLLEY JACK
SWL (Safe working load) up to 2 Tonne (2,000KG)
Dual piston quick lift, with foot pedal
Polyurethane coated, non marking, quiet roll wheels
Removable jack pad to prevent damage to the vehicle
Easy grip handle
Item Code: 657305
Model: TH32505B
INTRODUCTION
For your safety please read this manual before using any lifting equipment ensuring you fully
understand its operation and the safety procedures to be observed.
Ensure this manual is retained for future reference and that new users of this product
read and understand the content before they use the product.
GUARANTEE
Please visit halfords.com/advanced for information on warranty period and full terms and conditions.
HAL1478/35823
INSTRUCTION MANUAL
Advertisement
Related Manuals for Halfords ADVANCED TH32505B
Summary of Contents for Halfords ADVANCED TH32505B
- Page 1 The Supply of Machinery (Safety) (Amendment) Regulations 2011 Statutory instrument 2011 No.2157 Halfords Limited hereby declare that the machine described below is both in its basic design and construction and in the version marketed by us conforms to the relevant safety and health related requirements of the appropriate EC Directives.
- Page 2 WARNING FOR YOUR SAFETY AND TO PREVENT INJURY: Failure to comply with these instructions can cause serious injury and damage to the vehicle. If you are in any way unsure, do not attempt to use this product and consult Use Service Jack For a qualified mechanic.
- Page 3 5. Once the axle stands are properly located, VERY SLOWLY turn the pole section of the handle anti-clockwise until the vehicle begins to lower onto the stands. Lower the vehicle slowly so as not to shock load the jack stands. 6.