Table of Contents
Advertisement
Settings Menu Content
Picture Menu Content
Mode
Contrast
Brightness
Sharpness
Colour
Energy Saving
Backlight
Picture Zoom
Picture Shift
Tru HDR
Advanced Settings
Dynamic
Contrast
Colour Temp
White Point
Tru Blue
Tru Micro
Dimming
Noise Reduction
Tru Contour
Tru Flow
Tru Flow
Demo
You can change the picture mode to suit your preference or requirements. Picture
mode can be set to one of these options: Cinema, Game(optional), Sports, Dynamic
and Natural.
Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and Dolby Vision Bright picture
mode options will be available instead of Cinema and Natural modes.
Adjusts the light and dark values on the screen.
Adjusts the brightness values on the screen.
Sets the sharpness value for the objects displayed on the screen.
Sets the colour value, adjusting the colours.
For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto,
Screen Off or Off.
Note: Available options may differ depending on the selected Mode.
This setting controls the backlight level. This option will be avai̇ lable if the Energy Saving
is set to Custom (will be located under the Energy Saving setting). Highlight and use
Left/Right directional buttons to set.
Sets the desired image size format.
This option may be available depending on the Picture Zoom setting (will be located
under the Picture Zoom setting). Highlight and press OK, then use directional buttons
to shift the picture upwards or downwards.
Virtual HDR function that manipulates colour, saturation and dynamic contrast, basically
converts Standard Dynamic Range picture to High Dynamic Range picture. Set as On
to enable.
You can change the dynamic contrast ratio to desired value.
Sets the desired colour temperature value. Cool, Normal, Warm and Custom options
are available.
If the Colour Temp option is set as Custom, this setting will be available (will be located
under the Colour Temp setting). Increase the 'warmth' or 'coolness' of the picture by
pressing Left or Right buttons.
White colour enhancement function that makes white colour more cooler in order to
make more bright picture. Set as On to enable.
Low, Medium, High and Off options are available. While
it will enhance contrast locally for each defined zone.
If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce
the amount of noise.
Low, Medium, High and Off options are available. While
decrease the contour effects in low resolution contents and auto streaming services.
Press left/right buttons to set
is active, it will optimize the TV's video settings for motional images to acquire a better
quality and readability.
Tru Flow
When
option is set to Low, Medium or High, this option will be available (will
be located under the Tru Flow setting). Press OK button to activate the demo mode.
While demo mode is active, the screen will be divided into two sections, one displaying
Tru Flow
the
activity, the other displaying the normal settings for TV screen. Press
OK button again to cancel.
English - 18 -
Tru Flow
to Low, Medium, High or Off. While
Tru Micro Dimming
is active,
Tru
Contour is active, it will
Tru Flow
(**) Limited Models Only
Advertisement
Table of Contents
