Page 1
43/49/50/55/58/65 UA3A Series 43/49/50/55/58/65 UA20 Series 43/49/50/55/58/65 UA2B Series 43/49/50/55/58/65 UA4B Series 43/49/50/55/58/65 UA6B Series OPERATING INSTRUCTIONS...
Timeshift Recording .........24 Table of Contents Disk Format .............24 Safety Information ..........2 Schedule List ...........24 CEC..............25 Introduction ............4 Google Cast ............25 Features ..............4 HBBTV System ........... 26 Stand Installation & Wall Mounting ....... 5 Freeview Play Platform ........26 Antenna Connection..........
• Do not expose the TV to direct sunlight or do Safety Information not place open flames such as lit candles on the top of or near the TV. • Do not place any heat sources such as electric CAUTION heaters, radiators, etc. near the TV set. RISK OF ELECTRIC SHOCK • Do not place the TV on the floor and inclined DO NOT OPEN surfaces.
Page 4
Hazardous Live Terminal: The marked earthing – and to a television distribution system using terminal(s) is/are hazardous live under normal coaxial cable, may in some circumstances create a fire operating conditions. hazard. Connection to a television distribution system has therefore to be provided through a device providing Caution, See Operating Instructions: The electrical isolation below a certain frequency range marked area(s) contain(s) user replaceable (galvanic isolator).
High Dynamic Range (HDR) / Hybrid Log- Introduction Gamma (HLG) Thank you for choosing our product. You’ll soon be Using this feature the TV can reproduce greater enjoying your new TV. Please read these instructions dynamic range of luminosity by capturing and then carefully.
Stand Installation & Antenna Connection Wall Mounting Connect the aerial or cable TV plug to the AERIAL INPUT (ANT) socket or satellite plug to the SATELLITE Assembling / Removing the pedestal INPUT (LNB) socket located on the rear side of the TV. Preparations Rear side of the TV Take out the pedestal(s) and the TV from the packing...
Other Connections If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making any connection. After the connection is done, you can turn on the units and use them. To enable VGA/Component audio, Connector Type Cables Device you will need to use the back audio inputs with a VGA/Component audio Component cable for audio connection.
To switch the TV into standby Turning On/Off the TV (optional) The TV cannot be switched into standby mode via Connect power control button. Press and hold the Standby button on the remote control. Power off dialogue will appear on IMPORTANT: The TV set is designed to operate on the screen.
to move the focus, proceed, adjust some settings and Once you have connected external systems to your press OK to make selections in order to make changes, TV, you can switch to different input sources. Press the set your preferences, enter a sub-menu, launch an Source button on your remote control consecutively application etc.
Remote Control Standby: Quick Standby / Standby / On Numeric buttons: Switches the channel in Live TV mode, enters a number or a letter in the text box on the screen Language: Switches among sound modes (analogue TV), displays and changes audio language (digital TV, where available) Home: Opens the Home Screen Mute: Completely turns off the volume of the TV...
to a Google account in order to use Google services. Initial Setup Wizard This step will be skipped if no internet connection has been established in the previous step or if you already Note: Follow the on-screen instructions to complete the initial signed in to your Google account in Quick Setup step.
Page 12
later using the Settings>Device Preferences>Usage the desired operator and press OK or the Right & Diagnostics menu on the Home Screen. directional button to proceed. On the next screen select Scan option to start a search or select Skip Information on Google services and some features of Scan to continue without performing a search.
satellite and to enable scan this option should be set Home Screen as On first. Press Back button and select next satellite you want to set. After you completed the configuration To enjoy the benefits of your Android TV, your TV must changes, press the Right directional button to proceed. be connected to the Internet. Connect the TV to a (*) If you have a Direct satellite system, DiSEqC Set option home network with a high-speed Internet connection.
set input source. Define a time after which you want Live TV Mode Menu Content your TV to turn itself off or set as Off to disable. Switch the TV to Live TV mode first and then press CI Card: Display available menu options of the CI card the Menu button on the remote to see Live TV menu in use. This item may not be available depending on options.
FreeviewPlay Settings: Press OK to display the System Information: Display detailed system terms and conditions for Freeview Play services. information on the current channel such as Signal You can accept or decline using the related options Level, Signal Quality, Frequency etc. on the side of the screen.
Channel Store Type: Set your store type preference. Other options Favorite Network Select: Select your favourite net- Add new network: Add networks with hidden SSID’s. work. This menu option will be active, if more than only Scanning always available: You can let the location one network is available.
Page 17
will be shown. Highlight the Scan option and press selection screen for the General Satellite or Satellite OK to start scan. The found channels will be stored channel installation mode. When this scanning option in the channel list. is preferred, some scanning configurations will not be available and thus the preferences you made during LCN: Set your preference for LCN.
Channel Installation Mode Version Set this option as Antenna, Cable, Preferred Satel- Displays system version number. lite, General Satellite or Satellite. Accounts & Sign In Auto Channel Update Google: This option will be available if you have signed Turn the auto channel update function on or off. in to your Google account. You can configure your data Channel Update Message syncing preferences or remove your registered account on the TV.
Page 19
Netflix ESN: Display your ESN number. ESN Picture number is an unique ID number for Netflix, created Picture Mode: Set the picture mode to suit your especially to identify your TV. preference or requirements. Picture mode can be Date & time: Set the date and time options of your set to one of these options: User, Standard, Vivid, TV.
Page 20
ground. Set your MPEG NR preference as Low, grey scale uniformity can be improved. Adjust the Medium, Strong or turn it off by setting as Off. strength of the Red, Green, Blue colours and Gain value manually. Highlight Enable and press OK to Adaptive Luma Control: Adaptive Luma control turn this function on.
available. Highlight the option you prefer and Pan and Fade: Turn this option on if you want to press OK to set. hear the audio commentary more clearly, when it is available through broadcast. Reset to Default: Resets the sound settings to factory defaults.
filter the channel list or select Broadcast option to see Play’s TV Guide row on the Home Screen or press all installed channels in the channel list. the EPG button on the remote. Electronic Programme Guide is also available in Live TV mode. You can To sort the channels highlight Sort and press the OK switch to Live TV mode by either launching the Live TV button.
Page 23
streaming content and internet applications. These refer to Network & Internet>Wi-Fi section under the settings can be configured from Settings>Network & title of Settings. Internet menu. You can also highlight the Connected/ Not Connected icon on the Home screen and press OK to access this menu. For further information refer to Network &...
USB player and the USB device function could lead to copyright infringement of itself. Do not pull out your drive while playing a file. authors' rights. Toshiba asks you to respect the intellectual property rights of third parties. From a Mobile Device via DMR Make sure that your mobile device is connected to the same network as your TV.
Instant Recording Schedule List Press Record button to start recording an event You can add reminders or record timers using the instantly while watching a programme. Press Stop Schedule List menu. You can access the Schedule button to cancel instant recording. List from the Record menu in Live TV mode.
source from the list. To terminate this operation and On your android device, go to ‘Settings’ from the control the TV via the remote again, press the Source notification panel or home screen button, which will still be functional, on the remote and Tap on ‘Device Connectivity’ switch to another source.
HbbTV applications use the buttons on the remote the next power on. The search will be performed for control to interact with the user. When an HbbTV the set Tuner Mode in the Channels>New Channels application is launched, the control of some buttons Available>Tuner menu in Live TV mode.
and you notice the infra red LED flicker through the VGA Input Typical camera, the remote control is working. The TV needs Display Modes to be checked. If you do not notice the flickering, the batteries may The following table is an illustration of some of the be exhausted. Replace the batteries. If the remote is typical video display modes. Your TV may not support still not working, the remote control might be broken all resolutions.
Disposal Information Disposal... The following information is only for EU-member states: Disposal of products The crossed out wheeIed dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product.